i f(av) sinusoidal waveform 30 a v rrm 1200 v i fsm 350 a v f @ 30 a, t j = 25c 1.41 v trr @ 1a, 100a/s 95 ns t j - 40 to 150 c major ratings and characteristics description/ features the 30epf12pbf & 30CPF12PBF soft recovery quiet ir rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. the glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. typical applications are: output rectification and freewheeling in inverters, choppers and converters and input rectifications where severe restrictions on conducted emi should be met. 30cpf series is a drop in replacement for 25cpf series (parallel connection only) to-247ac (modified) 30epf.. package outline 30cpf.. fast soft recovery rectifier diode lead-free ("pbf" suffix) bulletin i2170 10/04 quiet ir series 30epf12pbf, 30CPF12PBF v f < 1.41v @ 30a t rr = 95 ns v rrm = 1200v characteristics values units www.vishay.com 1 document number: 94101
30epf12pbf, 30CPF12PBF quiet ir series bulletin i2170 10/04 i f(av) max. average forward current 30 a @ t c = 95 c, 180 conduction half sine wave i fsm max. peak one cycle non-repetitive 300 10ms sine pulse, rated v rrm applied surge current 350 10ms sine pulse, no voltage reapplied i 2 t max. i 2 t for fusing 450 10ms sine pulse, rated v rrm applied 636 10ms sine pulse, no voltage reapplied i 2 t max. i 2 t for fusing 6360 a 2 s t = 0.1 to 10ms, no voltage reapplied part number v rrm , maximum v rsm , maximum non repetitive i rrm peak reverse voltage peak reverse voltage 150c vvma 30epf12pbf, 30CPF12PBF 1200 1300 6 voltage ratings absolute maximum ratings electrical specifications typical recovery characteristics parameters 30.pf.. units conditions a a 2 s v fm max. forward voltage drop 1.41 v @ 30a, t j = 25c r t forward slope resistance 10.09 m ? v f(to) threshold voltage 0.992 v i rm max. reverse leakage current 0.1 t j = 25 c 6t j = 150 c parameters 30.pf.. units conditions t j = 150c v r = rated v rrm ma t rr reverse recovery time 450 ns i f @ 30apk i rr reverse recovery current 6.1 a @ 25a/ s q rr reverse recovery charge 2.16 c @ 25c s snap factor tb/ta 0.6 typical parameters 30.pf.. units conditions ta tb trr t ifm dir dt qrr irm (rec) www.vishay.com 2 document number: 94101
30epf12pbf, 30CPF12PBF quiet ir series bulletin i2170 10/04 t j max. junction temperature range - 40 to 150 c t stg max. storage temperature range - 40 to 150 c r thjc max. thermal resistance junction 0.8 c/w dc operation to case r thja max. thermal resistance junction 40 c/w to ambient r thcs typical thermal resistance, case to 0.2 c/w mounting surface , smooth and greased heatsink wt approximate weight 6 (0.21) g (oz.) t mounting torque min. 6 (5) max. 12 (10) case style to-247ac jedec (modified) marking device 30epf12, 30cpf12 thermal-mechanical specifications kg-cm (ibf-in) fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 1 - current rating characteristics fig. 2 - current rating characteristics 80 90 100 110 120 130 140 150 0 5 10 15 20 25 30 35 30 60 90 120 180 maximum allowable case temperature (c) conduction angle average forward current (a) 30.pf.. series r (dc) = 0.8 k/w thjc 80 90 100 110 120 130 140 150 0 1020304050 dc 30 60 90 120 180 maximum allowable case temperature (c) conduction period average forward current (a) 30.pf.. series r (dc) = 0.8 k/w thjc 0 10 20 30 40 50 60 0 5 10 15 20 25 30 35 rms limit 180 120 90 60 30 conduction angle average forward current (a) maximum average forward power loss (w) 30.pf.. series t = 150c j 0 10 20 30 40 50 60 70 80 0 1020304050 dc 180 120 90 60 30 rms limit conduction period average forward current (a) maximum average forward power loss (w) 30.pf.. series t = 150c j parameters 30.pf.. units conditions www.vishay.com 3 document number: 94101
30epf12pbf, 30CPF12PBF quiet ir series bulletin i2170 10/04 fig. 7 - forward voltage drop characteristics fig. 5 - maximum non-repetitive surge current fig. 6 - maximum non-repetitive surge current fig. 9 - recovery time characteristics, t j = 150c fig. 8 - recovery time characteristics, t j = 25c 50 100 150 200 250 300 350 110100 number of equal amplitude half cycle current pulses (n) peak half sine wave forward current (a) initial t = 150c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j 30.pf.. series at any rated load condition and with rated v applied following surge. rrm 50 100 150 200 250 300 350 400 0.01 0.1 1 pulse train duration (s) peak half sine wave forward current (a) versus pulse train duration. initial t = 150c no voltage reapplied rated v reapplied rrm j maximum non repeti tive surge current 30.pf.. series 1 10 100 1000 0123456 t = 25c j instantaneous forward current (a) instantaneous forward voltage (v) t = 150c j 30.pf.. series 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 50 100 150 200 rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a i = 30 a 20 a maximum reverse recovery time - trr (s) 30.pf.. series t = 25 c j fm 0 0.2 0.4 0.6 0.8 1 1.2 050100150200 rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a i = 30 a 20 a maximum reverse recovery time - trr (s) fm 30.pf.. series t = 150 c j www.vishay.com 4 document number: 94101
30epf12pbf, 30CPF12PBF quiet ir series bulletin i2170 10/04 fig. 14 - thermal impedance z thjc characteristics fig. 12 - recovery current characteristics, t j = 25c fig. 13 - recovery current characteristics, t j = 150c fig. 10 - recovery charge characteristics, t j = 25c fig. 11 - recovery charge characteristics, t j = 150c 0 1 2 3 4 5 6 0 50 100 150 200 rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a i = 30 a 20 a maximum reverse recovery charge - qrr (c) fm 30.pf.. series t = 25 c j 0 2 4 6 8 10 0 50 100 150 200 rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a i = 30 a 20 a maximum reverse recovery charge - qrr (c) fm 30.pf.. series t = 150 c j 0 5 10 15 20 25 0 50 100 150 200 maximum reverse recovery current - irr (a) rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a i = 30 a 20 a 30.pf.. series t = 25 c j fm 0 5 10 15 20 25 30 35 050100150200 maximum reverse recovery current - irr (a) rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a i = 30 a 20 a 30.pf.. series t = 150 c j fm 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 square wave pulse duration (s) steady state value (dc operation) single pulse d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08 transient thermal impedance z (k/w) thjc 30.pf.. series www.vishay.com 5 document number: 94101
30epf12pbf, 30CPF12PBF quiet ir series bulletin i2170 10/04 15.90 (0.626) 15.30 (0.602) 14.20 (0.559) 14. 80 ( 0.583) 3.70 (0.145) 4.30 (0.170) 5.30 ( 0.208) 5. 70 (0.225) 5.50 ( 0.217) 4. 50 (0 .177) (2 plcs.) 3. 55 (0.139) 3. 65 (0.144) 2. 20 (0.087) max. 1. 00 (0.039) 1. 40 (0.056) 0. 40 (0.213) 0.80 ( 0.032) 4.70 ( 0.185) 5. 30 (0.209) 1.5 ( 0.059) 2.5 ( 0.098) 2. 40 (0.095) max. 10.86 (0.427) 10. 94 ( 0.430) 20.30 (0.800) 19.70 (0.775) dia. 12 3 15.90 (0.626) 15.30 (0.602) 14 .20 (0.559) 14.80 ( 0.583) 3.70 (0.145) 4.30 (0.170) 5.30 ( 0.208) 5.70 (0.225) 5.50 ( 0.217) 4.50 (0.177) (2 plcs.) 3.55 (0.139) 3.65 (0.144) 2. 20 (0 .087) max. 1.00 (0.039) 1.40 (0.056) 0. 40 (0 .213) 0.80 ( 0.032) 4.70 ( 0.185) 5.30 (0.209) 1.5 ( 0.059) 2.5 ( 0.098) 2.40 (0.095) max. 10.86 (0.427) 10.94 ( 0.430) 20 .30 (0.800) 19 .70 (0.775) 1 3 dia. 1 cathode anode 3 2 base cathode outline table 2 13 base cathode anode anode 30epf12pbf dimensions in millimeters and inches 30CPF12PBF www.vishay.com 6 document number: 94101
30epf12pbf, 30CPF12PBF quiet ir series bulletin i2170 10/04 marking information lot code assembly international rectifier example: in assembly line "h" assembled on ww 35, 2000 lot code 5657 with assembly logo part number year 0 = 2000 p = lead-free week 35 line h 56 57 date code this is a 30epf12 30epf12 p035h rectifier international assembly lot code example: in assembly line "h" assembled on ww 35, 2000 with assembly lot code 5657 logo p = lead-free year 0 = 2000 part number line h week 35 p035h 56 57 date code this is a 30epf12 30epf12 ordering information table 30 e p f 12 pbf device code 1 5 24 3 1 - current rating (30 = 30a) 2 - circuit configuration: e = single diode c = single diode, 3 pins 3 - package: p = to-247ac (modified) 4 - type of silicon: f = fast recovery 5 - voltage rating (12 = 1200v) 6 - ! none = standard production ! pbf = lead-free 6 www.vishay.com 7 document number: 94101
30epf12pbf, 30CPF12PBF quiet ir series bulletin i2170 10/04 ir world headquarters: 233 kansas st., el segundo, california 90245, usa tel: (310) 252-7105 tac fax: (310) 252-7309 10/04 data and specifications subject to change without notice. this product has been designed and qualified for industrial level and lead-free. qualification standards can be found on ir's web site. www.vishay.com 8 document number: 94101
legal disclaimer notice vishay document number: 99901 www.vishay.com revision: 12-mar-07 1 notice the products described herein were acquired by vishay intertechnology, inc., as part of its acquisition of international rectifier?s power control systems (pcs) business, which closed in april 2007. specifications of the products displayed herein are pending review by vishay and are subject to the terms and conditions shown below. specifications of the products displayed herein are subject to change without notice. vishay intertechnology, inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale. international rectifier ? , ir ? , the ir logo, hexfet ? , hexsense ? , hexdip ? , dol ? , intero ? , and powirtrain ? are registered trademarks of international rectifier corporation in the u.s. and other countries. all other product names noted herein may be trademarks of their respective owners.
|
